Layers:
-
Value: Primary
Label: Primary
Description: N/A
Symbol:
-
Value: Secondary
Label: Secondary
Description: N/A
Symbol:
- objectid ( type: esriFieldTypeOID, alias: OBJECTID )
- id ( type: esriFieldTypeDouble, alias: ID )
- helibase ( type: esriFieldTypeString, alias: Helibase, length: 255 )
- address ( type: esriFieldTypeString, alias: Address, length: 255 )
- status ( type: esriFieldTypeString, alias: Status, length: 25 )
- shape ( type: esriFieldTypeGeometry, alias: Shape )
Layer: SACFS Recognised Helibases (0)
Name: SACFS Recognised HelibasesDisplay Field: id
Type: Feature Layer
Geometry Type: esriGeometryPoint
Description: The selection of Helibases (normally ovals) for use to support Aerial Firefighting by State Aviation Operations includes the following general principles; must be a clear area, a minimum of seventy five (75) metres by 75 metres potentially for more than one Aircraft; must be free of any loose objects or debris and dust free; must have access for a tri-axle articulated tanker. (Therefore an access road and hard standing area adjacent to the site, capable of holding a heavy vehicle with an all up weight of forty six (46) tonne and nineteen (19) metres long); the site needs to be suitable to control public access; needs to be remote from ‘Last Resort Refuge’ identified in the Bushfire Safer Places Project; needs to be remote from pre-planned Staging Areas identified by the Group Operations Management Plans; each site should be approximately twenty five (25) km from the next re-fuelling site. (7-10 minutes flying time)Spatial Reference: South Australia Lambert (GDA 2020); EPSG: 8059
Service Item Id: bfa8e00e963f4ca8b9ef510703ee703c
Copyright Text: South Australian Country Fire Service
Default Visibility: true
MaxRecordCount: 2000
MaxSelectionCount: 2000
Supported Query Formats: JSON, geoJSON, PBF
Min Scale: 0.0
Max Scale: 0.0
Supports Advanced Queries: true
Supports Statistics: true
Has Labels: false
Can Modify Layer: true
Can Scale Symbols: false
Use Standardized Queries: true
Supports Datum Transformation: true
Extent:
-
XMin: 1294312.2990999967
YMin: 1600291.4518
XMax: 1367241.8879999965
YMax: 1720208.3114999998
Spatial Reference: 8059 (8059) LatestVCSWkid(0)
Drawing Info:
-
Renderer:
- Unique Value Renderer:
Field 1: status
Field 2: N/A
Field 3: N/A
Field Delimiter: ,
Default Symbol:
- N/A
UniqueValueInfos:
Labeling Info:
-
N/A
-
Supports Statistics: true
Supports OrderBy: true
Supports Distinct: true
Supports Pagination: true
Supports TrueCurve: true
Supports Returning Query Extent: true
Supports Query With Distance: true
Supports Sql Expression: true
Supports Query With ResultType: false
Supports Returning Geometry Centroid: false
Supports Binning LOD: false
Supports Query With LOD Spatial Reference: false
Supports Percentile Statistics: true
Supports Having Clause: true
Supports Count Distinct: true
Supports Time Relation: true
Supports Sql Format: false
Supports Query Analytic: true
Supports Query With Current User: true
HasZ: false
HasM: false
Has Attachments: true
HTML Popup Type: esriServerHTMLPopupTypeAsHTMLText
Type ID Field: null
Fields:
-
Value: Primary
Label: Primary
Description: N/A
Symbol:
-
Value: Secondary
Label: Secondary
Description: N/A
Symbol:
- objectid ( type: esriFieldTypeOID, alias: OBJECTID )
- airbase ( type: esriFieldTypeString, alias: Airbase, length: 8000 )
- category ( type: esriFieldTypeString, alias: Category, length: 8000 )
- address ( type: esriFieldTypeString, alias: Address, length: 8000 )
- status ( type: esriFieldTypeString, alias: Status, length: 8000 )
- shape ( type: esriFieldTypeGeometry, alias: Shape )
- code ( type: esriFieldTypeString, alias: code, length: 8000 )
- water_prim ( type: esriFieldTypeString, alias: water_prim, length: 8000 )
- water_sec ( type: esriFieldTypeString, alias: water_sec, length: 8000 )
- water_supply ( type: esriFieldTypeString, alias: water_supply, length: 8000 )
- pump ( type: esriFieldTypeString, alias: pump, length: 8000 )
- generator ( type: esriFieldTypeString, alias: generator, length: 8000 )
- foam ( type: esriFieldTypeString, alias: foam, length: 8000 )
- retardant ( type: esriFieldTypeString, alias: retardant, length: 8000 )
- gel ( type: esriFieldTypeString, alias: gel, length: 8000 )
Layer: SACFS Recognised Airbases and Airstrips (1)
Name: SACFS Recognised Airbases and AirstripsDisplay Field: airbase
Type: Feature Layer
Geometry Type: esriGeometryPoint
Description: The airstrips selected for use to support aerial firefighting will be categorised by State Aviation Operations and use the following principals and minimum requirements: a demonstrated, historical and justified need; secure tenure of the airstrip; the runway should be a minimum of 900 metres long, but should exceed 1,000 metres if possible, with the option to extend to 1,200 metres; it should be on level or near level ground with no obstructions at either end, free from any hazards to aircraft; where possible orientation of the runway should be in the north to west quadrant; width of airstrip should be a minimum of 60 metres; airstrip should have direct access to the public road network; water supply should be a minimum of 45,000 litres static supply with the capacity to be re-supplied from mains, dam, or bore; identified personnel or brigades who are committed to, and can support aerial firefighting operations; and the airstrip will require an area for filling that is a safe distance from the runway.Within the Primary Response Zones (PRZs), there are approximately 25-30 kms between airbases. State aviation Operations used the principal that SACFS needs an aircraft on initial response, over an incident within ten minutes, and a returning aircraft every ten minutes after initial response in the PRZs. Using an initial response of two single engine air tankers, known air speed and turnaround times, SACFS can achieve this requirement with the above radii. Within the Secondary Response Zone populated areas, there are approximately 50-60 kms between airbases. This provides for a response time for a fixed wing bomber in these areas in around thirty minutes after re-locating to a SRZ airbase. Airbases in Primary Response Zones should be a minimum Category B, but a Category C Airbase with an Air Ops Brigade close at hand may be acceptable.Airbases in the Secondary Response Zone should be a minimum of Category C. This may be varied when special operational or risk circumstances prevail or a Contractor installs their own company facilities.Operational Requirements may dictate the need to operate out of a temporary airbase which is not currently recognised by State Aviation Operations. The decision to then operate out of temporary airbase resides with aircraft pilots and SACFS aircrew to ensure all safety and Operational Requirements are met.In addition to meeting the performance requirements of the aircraft, the safety and welfare needs of the Ground Filling Crews must also be met. This will be carried out by conducting risk assessments and considering incident and operational imperatives.SACFS aircrew may liaise with other key personnel such as Incident Controllers, Land Management Agencies and Land Owners during the decision making process. Spatial Reference: South Australia Lambert (GDA 2020); EPSG: 8059
Service Item Id: bfa8e00e963f4ca8b9ef510703ee703c
Copyright Text: South Australian Country Fire Service
Default Visibility: true
MaxRecordCount: 2000
MaxSelectionCount: 2000
Supported Query Formats: JSON, geoJSON, PBF
Min Scale: 0.0
Max Scale: 0.0
Supports Advanced Queries: true
Supports Statistics: true
Has Labels: false
Can Modify Layer: true
Can Scale Symbols: false
Use Standardized Queries: true
Supports Datum Transformation: true
Extent:
-
XMin: 1041703.1006999984
YMin: 1349138.9910000004
XMax: 1516108.1014000028
YMax: 1937851.6837000009
Spatial Reference: 8059 (8059) LatestVCSWkid(0)
Drawing Info:
-
Renderer:
- Unique Value Renderer:
Field 1: status
Field 2: N/A
Field 3: N/A
Field Delimiter: ,
Default Symbol:
- N/A
UniqueValueInfos:
Labeling Info:
-
N/A
-
Supports Statistics: true
Supports OrderBy: true
Supports Distinct: true
Supports Pagination: true
Supports TrueCurve: true
Supports Returning Query Extent: true
Supports Query With Distance: true
Supports Sql Expression: true
Supports Query With ResultType: false
Supports Returning Geometry Centroid: false
Supports Binning LOD: false
Supports Query With LOD Spatial Reference: false
Supports Percentile Statistics: true
Supports Having Clause: true
Supports Count Distinct: true
Supports Time Relation: true
Supports Sql Format: false
Supports Query Analytic: true
Supports Query With Current User: true
HasZ: false
HasM: false
Has Attachments: true
HTML Popup Type: esriServerHTMLPopupTypeAsHTMLText
Type ID Field: null
Fields:
-
Value: Primary Response Zone
Label: Primary Response Zone
Description: N/A
Symbol:-
Style: esriSFSSolid
Color: [252, 235, 215, 0]
Outline:-
Style: esriSLSSolid
Color: [0, 112, 255, 255]
Width: 2 -
Value: Helitak Response Zone
Label: Helitak Response Zone
Description: N/A
Symbol:-
Style: esriSFSSolid
Color: [115, 0, 0, 127]
Outline:-
Style: esriSLSSolid
Color: [110, 110, 110, 0]
Width: 0 -
Value: Extended Helitak Response Zone
Label: Extended Helitak Response Zone
Description: N/A
Symbol:-
Style: esriSFSSolid
Color: [168, 168, 0, 127]
Outline:-
Style: esriSLSSolid
Color: [110, 110, 110, 0]
Width: 0 - responsezo ( type: esriFieldTypeString, alias: ResponseZo, length: 50 )
- prespzone ( type: esriFieldTypeString, alias: PRespZone, length: 20 )
- secondresponsezone ( type: esriFieldTypeString, alias: SecondResponseZone, length: 50 )
- shape ( type: esriFieldTypeGeometry, alias: Shape )
- st_area(shape) ( type: esriFieldTypeDouble, alias: st_area(shape) )
- st_perimeter(shape) ( type: esriFieldTypeDouble, alias: st_perimeter(shape) )
- objectid ( type: esriFieldTypeOID, alias: OBJECTID )
Layer: SACFS Primary Response Zones (2)
Name: SACFS Primary Response ZonesDisplay Field: responsezo
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: Primary Response Zones have been established for the rapid deployment of aerial firefighting assets to reported fires within the zone. The zone is approximately 25 nautical miles in radius from the nominated operational airbase (NOB).Spatial Reference: South Australia Lambert (GDA 2020); EPSG: 8059
Service Item Id: bfa8e00e963f4ca8b9ef510703ee703c
Copyright Text: South Australian Country Fire Service
Default Visibility: true
MaxRecordCount: 2000
MaxSelectionCount: 2000
Supported Query Formats: JSON, geoJSON, PBF
Min Scale: 0.0
Max Scale: 0.0
Supports Advanced Queries: true
Supports Statistics: true
Has Labels: false
Can Modify Layer: true
Can Scale Symbols: false
Use Standardized Queries: true
Supports Datum Transformation: true
Extent:
-
XMin: 1010068.7616999969
YMin: 1306063.9469000008
XMax: 1548590.5112000033
YMax: 1823433.1583999991
Spatial Reference: 8059 (8059) LatestVCSWkid(0)
Drawing Info:
-
Renderer:
- Unique Value Renderer:
Field 1: secondresponsezone
Field 2: N/A
Field 3: N/A
Field Delimiter: ,
Default Symbol:
- N/A
UniqueValueInfos:
Labeling Info:
-
N/A
-
Supports Statistics: true
Supports OrderBy: true
Supports Distinct: true
Supports Pagination: true
Supports TrueCurve: true
Supports Returning Query Extent: true
Supports Query With Distance: true
Supports Sql Expression: true
Supports Query With ResultType: false
Supports Returning Geometry Centroid: false
Supports Binning LOD: false
Supports Query With LOD Spatial Reference: false
Supports Percentile Statistics: true
Supports Having Clause: true
Supports Count Distinct: true
Supports Time Relation: true
Supports Sql Format: false
Supports Query Analytic: true
Supports Query With Current User: true
HasZ: false
HasM: false
Has Attachments: false
HTML Popup Type: esriServerHTMLPopupTypeAsHTMLText
Type ID Field: null
Fields: